rayte

Solar data · measurement

Self-consumption rate and solar coverage are not the same number.

One asks where your solar production went. The other asks where your household electricity came from. A system can score well on one and poorly on the other.

Solar apps often present several percentages without showing the denominator. Before comparing homes, tariffs or batteries, write the formula beside the figure.

1. Self-consumption rate: where did solar production go?

Self-consumption rate = solar production used on site ÷ total solar production × 100. If a system produces 10,000 kWh and 7,000 kWh is consumed within the property, its self-consumption rate is 70%. The remaining 3,000 kWh is exported, curtailed or otherwise accounted for by the monitoring boundary.

This measure can improve when a household shifts flexible demand into sunny hours or adds a battery. It can also improve when the array becomes smaller relative to demand. A high percentage is therefore not automatic proof that the system is large enough or financially optimal.

2. Solar coverage: where did household electricity come from?

Solar coverage = household consumption supplied by solar ÷ total household consumption × 100. If the home consumes 14,000 kWh and solar supplies 7,000 kWh, solar coverage is 50%. The other 7,000 kWh came from the grid or another source.

Coverage can rise when production rises, when demand moves into daylight hours or when storage moves surplus into the evening. It can fall after adding an electric vehicle, pool equipment or electric heating even if the solar array performs exactly as expected.

Worked example

The same 7,000 kWh produces two percentages

Solar production
10,000 kWh
Used on site
7,000 kWh
Household demand
14,000 kWh
Export
3,000 kWh

Self-consumption is 70%; solar coverage is 50%. Neither figure replaces the other.

3. Why battery data is easy to double count

A battery does not create energy. Solar sent into the battery and later discharged remains part of the same solar production. Do not add battery discharge to solar generation. Allow for conversion losses and confirm whether the inverter app labels battery charging as consumption, internal transfer or a separate flow.

Use one time boundary and one energy boundary. Annual inverter totals mixed with a bill covering eleven months will not reconcile. A smart meter records grid import and export, while an inverter records generation and internal flows; neither device alone necessarily describes the whole home.

4. Four numbers that should approximately reconcile

  • Solar production = on-site use + export + curtailment or unexplained losses.
  • Household demand = solar supplied to loads + grid import + any other source.
  • Grid export should be compared with distributor data for the same timestamps.
  • Battery charge and discharge should be treated as transfers, with losses, not new generation.

Monitoring platforms round values and may use slightly different sampling intervals, so a small difference is normal. A large difference should be investigated before publishing a percentage.

5. Which percentage should you optimise?

Optimise neither in isolation. A battery can raise self-consumption while failing to repay its cost. A larger array can lower the self-consumption percentage while delivering more useful energy overall. Compare euros saved, import avoided, export value, resilience and environmental objectives alongside both percentages.

Rayte’s practical rule: always publish the numerator, denominator, dates and device source next to a solar percentage.

Related evidence and tools

Published 3 October 2026. Formulas are general; monitoring labels and settlement rules vary.